Towertalk
[Top] [All Lists]

[TowerTalk] tuning the beam

To: <towertalk@contesting.com>
Subject: [TowerTalk] tuning the beam
From: k1jn@99main.com (Joe Natale)
Date: Sat, 22 Aug 1998 21:07:44 -0400
I recently posted a question regarding tuning a triband beam prior to
mounting it on the tower. I built it on a mast about four feet above the
ground. I wanted to know if I should try tuning it at four feet before
mounting it. The antenna is a Cushcraft A4S with the 40m add on kit. Thanks
to all that replied. Answers fell into three categories: 1-tune it on the
mast at four feet where I could easily reach it, 2- turn it facing straight
up with director just off the ground and tune it, and 3- just build it to
Cushcraft specs and mount it on the tower without tuning. I tried number 1,
and got OK readings on 10 and 15; 20 and 40 were way low (out of band).  I
tried adjusting the antenna without much change. I didn't try number two, as
I couldn't turn it up alone. I reset it to the specs in the manual and today
we put it on the tower at 75'.
To my pleasant amazement, the 2:1 SWR points were 10m 28.0 to 29.4, 15m 21.0
to 21.450, 20m 14.0 to 14.350 and 40m 7.080 to 7.220. Guess the number three
guys were right!


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>