Towertalk
[Top] [All Lists]

[TowerTalk] RF Epoxy for Antenna Switch

To: <towertalk@contesting.com>
Subject: [TowerTalk] RF Epoxy for Antenna Switch
From: W4EF@pacbell.net (Michael Tope)
Date: Sun, 20 Sep 1998 05:08:45 +-100
I am looking for an epoxy suitable for use in a high power RF switch 
application.
I need to keep the center conductor of an SO-239 from rotating. Does JB Weld
have suitable properties as an RF dielectric such that it wont breakdown when 
exposed to high RF voltages 1.5KW 3:1 VSWR Zo=50 Ohm. What about resistivity?
Frequencies are low (1.8 - 30 MHz).

Thanks,

Mike, W4EF.........


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] RF Epoxy for Antenna Switch, Michael Tope <=