Towertalk
[Top] [All Lists]

[TowerTalk] Re: Munimula masts, a serious question

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: Munimula masts, a serious question
From: k1vr@juno.com (Fred Hopengarten)
Date: Tue, 13 Oct 1998 08:47:42 EDT
From:
Fred Hopengarten  K1VR               781/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address:  fhopengarten@mba1972.hbs.edu

On Mon, 12 Oct 1998 23:50:49 EDT JSheinb785@aol.com writes:
>
>I've been using schedule 40 galvanized water pipe (1.93" OD) for 20 
>years and
>have never had a failure. I've had over 10 ft. out the top of the 
>tower (with
>a thrust bearing, of course) with a 2 meter 12 el  beam atop, a 1015 
>Hygain
>duobander in the middle and a 20 mtr monobander 2 ft above the thrust 
>brg.  So
>why the fuss over throwing away extra money on an Aluminum mast or a 
>chrome-
>moly steel tube?
>73, Joe WD5FHG


K1VR:  You, my man, have been lucky. I once had to cut (with a hacksaw) a
bent Schedule 40 at the Harvard Wireless Club's station (W1AF) when I was
a graduate student and still fearless. It had a CL-33 at 2' above the
thrust bearing and a lightweight 2 el shorty 40 by Moseley at 10' above
the thrust bearing. And it wasn't like the mast was exposed to high winds
-- it was on a rooftop in the middle of downtown Cambridge, MA topping
out at only about 75', with taller buildings in several directions.  I
hope you are so lucky all the days of your life.

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>