Towertalk
[Top] [All Lists]

[TowerTalk] Sloper Question

To: <towertalk@contesting.com>
Subject: [TowerTalk] Sloper Question
From: k2fr@juno.com (Fredrick R. Gern)
Date: Thu, 19 Nov 1998 19:00:25 EST
Seems this is a good place to ask tough questions:
Moved and reinstalled my tower.  It is Rohn 45. On top
is a Force 12 C3 (works great, but can't get 12 & 17 down w/tuner). 
That's not the main problem. I also installed a used (very little) Alpha
Delta DX-A sloper antenna. 

At the old qth I had a TH7 on top and a homemade 80/40 sloper about 3 ft.
below it. Worked very well.  Now the new sloper is about 3 ft below the
C3 
and it only resonates on 160.  There are NO guy wires or nearby metal
object.
The tower is grounded by a rod about 10 in the earth.  The swr on 40 and
80
is flat across the band AND I have a serious problem getting a match with
a Murch tuner. Basically it will not match any better than w/o the tuner.

Local guys are stumped.  Ideas I have are bad coax connector at antenna.
Or, with no balun or coax coil the antenna may be coupling to the tower. 
The 
coax comes down the tower to a RCS-8V remote switch.

Any ideas?  I can't climb the tower because of physical limitations and
don't
 want to impose on friends too often!

Fred, K2FR

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>