Towertalk
[Top] [All Lists]

[TowerTalk] ? on Rebuilding Rotor

To: <towertalk@contesting.com>
Subject: [TowerTalk] ? on Rebuilding Rotor
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Sat, 19 Dec 1998 08:04:49 EST
In a message dated 98-12-18 21:21:29 EST, jnyeager@southern.edu writes:

> Am cleaning and repairing old rotor and am wondering what is the 
>  best type of grease to use on the bearings upon reassembly??

    What kind of rotator? The trick is to not use too much grease. Hy-Gain
recommends a thimble full for their Ham IV/T2X. If you're in a cold part of
the country, you might want to use a low temp grease like for snowmobiles. 

Cheers,   Steve    K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>