Most of the previous comments about so called SWR "bumps" caused by UHF
connectors at HF frequencies, should be ignored. I have tested numerous
combinations on an HP 8753C network analyzer. They are quite acceptable
up to the UHF range. They are virtually invisible below 30 mhz.
For a very good summary on UHF connector losses, see:
http://www.berkshire.net/~robbins/technote/connloss.html
73,
Ray, W4BYG
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|