>Prior to any of the methods mentioned, a little heat on the sheared
>bolt, along with a little penetrating lubricant (WD-40) will help the
>process...remember that oil burns
WD-40 is flammable and should not be used in conjunction with an open flame
or spark. (I often use WD-40 as starting fluid in cold weather.) When
combining heat + penetrating lubricant, use non-flammable Liquid Wrench.
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|