Towertalk
[Top] [All Lists]

[TowerTalk] torque dampener

To: <towertalk@contesting.com>
Subject: [TowerTalk] torque dampener
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Fri, 29 Jan 1999 09:47:04 EST
In a message dated 99-01-29 09:35:30 EST, grhosler@imation.com writes:

> Watching the antennas turn (and stop!), you can tell it absorbs much of the
>  start/stop torque.  My greatest concern was the impact of UV on the rubber
>  coupling.  To date I've seen no problem.  In my estimation it is a valuable
>  addition.
>  
       I think that part of the problem was that the PTA's didn't stay
together very well either.

      They are valuable and using one would increase the capacity of a rotator
by approximately 25%.

Cheers,  Steve   K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>