1/4" on the top set for Rohn 25 is my preferred installation.
Just don't mix sizes at one level. It makes the putting on
proper tension a very difficult compromise.
de n0yvy steve
At 07:27 PM 3/3/99 -0500, J. Parise wrote:
> Are there any issues related to mixing 1/4" and 3/16" guy wire on a 25G
> i.e., 1/4" for the top set, 3/16" for the lower sets or some other
> 73 -- Jim W1UK
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com