i wouldn't trust it higher than about 10'... maybe 20' if you use lots
of bracing and guying. both toprail and conduit are fairly soft steel
and easily bent (in the case of conduit thats by design). toprail is
meant to be supported every 10' or so and even at that you have
undoubtedly seen places where it gets bent from someone climbing over
> Brian Kell wrote:
> I am considering building a tower. I am planning on using the
> 1-5/8" toprail for the legs.
> 3/4" conduit for the bracing.
> the tower will be a "modular" design - able to be stack each section
> together. My question is, will this tower support an HF beam with a
> 11.6sqft. windload??
> Please e-mail any comments or suggestions to email@example.com
> Thank you
> Brian - N7VCC
David Robbins K1TTT (ex KY1H)
firstname.lastname@example.org or email@example.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com