[Top] [All Lists]

[TowerTalk] Stacking 105CA & 155CA on T2X rotator

To: <>
Subject: [TowerTalk] Stacking 105CA & 155CA on T2X rotator
From: (
Date: Tue, 9 Mar 1999 14:56:53 EST
Re: Pete, N4ZR's, suggestion that the shelf and a muffler clamp are a cheaper
solution than the thrust bearing: In my case, for maintenance, I use a piece
of angle iron and two muffler clamps, one for the mast, the other for a tower
leg. I set the angle iron on the cross members and tighten up the two muffler
clamps. Cheaper than the cost of the rotor plate!
73, Bert N4CW

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>