Very well said .
Rick / KI5VZ
Rick's Tower Service
Dan Arney wrote:
> Gang, Lets just say this if an airplane made out of Aluminum did not
> flex itself in all directions, and I mean all then millions of people
> including myself would not be here. A B-747 wing tip can and will flex a
> total of about 8 to 14' according to gust loads and wing loading of the
> plane depending on total weight. Fuel management is very critical to the
> safe conduct of the flight to provide structural integrity of the plane.
> I have over 20,000 hours as Pilot in 375 types of planes.
> Been there done that
> If I were in the market with the money I would not even hesitate to buy
> an aluminum tower if it was designed to meet my requirements.
> The ones that bad mouth them COME forward with the FACTS Just the FACTS
> MAN. Like put up or shut up.
> A B-747 made of steel would weight somewhere around 1.5 to 2 Mil. pounds
> empty. We would have to use the Saturn 5 to get it airborne.
> The lite weight guy (Aluminum) with over 400 PAX's 400,000 pounds of
> fuel and the plane come in at around 888,000 at brake release. From
> brake release to wheels in the well, flaps up on speed sked the fuel
> consumption is about 10,000.
> Back to towers.
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com