Hi all The commercial tower companies that I am familiar with use a transit
. To true a tower . But I don't think most of you would want to go out and
spend 5 or 6 hundred dollars for a transit . A carpenters level is the best
way to do it if you don't have a transit . Start at the bottom set of guys
and work your way up .
73's Good luck
Rick's Tower Service
Rush Johnson wrote:
> What is the "proper" way to plumb a 100' guyed 45G tower? I have almost
> finished erecting the tower (it's up to 70' now) and have installed two
> guy stations at 33' and 66' (the last station will be at 99') using
> Phillystran with short 1/4" EHS sections down near the anchors. The
> tower is "plumb" according to my four foot level, but doesn't look that
> way to the eye. Not sure if its an optical illusion (due to the tower
> being in the woods with some really tall trees behind it) or not, but
> want to make sure its "dead on" accurate.
> Also, if I use the guys to pull the tower one way or another to
> straighten it up, doesn't this upset the balance of forces on the three
> legs? How much is too much when tensioning the guys to plumb?
> Thanks for any advice.
> Rush -- W4QA
> Rush Johnson -- W4QA (ex NR4M , WD4AEI)
> 100 Horseman Cove
> Matthews, NC 28105-7760
> Tel: 704.814.0487
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com