Steve Jackson wrote:
> OK, I give up.
> I have been trying for DAYS to find a source of 2" OD, 0.375" wall 7075-T6
> extruded aluminum tubing.
> Nobody seems to have any. I have called more than 9 places, from coast to
> coast. Only an Iranian website had any hope of providing this stuff, and
> I'll be damned if I have to buy it from the Iranians.
> I need at least a 16' long piece, and would take as much as 20' if I had
> to, in order to get it. I do not want to weld 2 pieces together.
> I need the aluminum because I have a weight restriction, and steel is just
> too heavy for my application. I am fully aware that this material runs $40
> a foot, versus chrome-moly 4043 at $20 or so.
> The aluminum weighs 2 1/4 lbs. a foot, and the steel is between 6 1/2 and 7
> 1/2 lbs. foot. That's 36 lbs. versus 120 lbs.! I'll pay for the aluminum.
> And yes, I am also aware that the yield strength is lower... 110 kpsi
> versus 73 kpsi. My calculations show I need 59 kpsi to survive a 90 mph wind.
> Can anyone help with a source for this 'rare' pipe?
> Replies via the reflector, or e-mail at email@example.com, or
> telephone 800-343-8977 ext. 29045.
> TIA 73 Steve KZ1X/4
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search.htm
i also need an aluminum mast about 20 to 24 feet for the same reasons.
up where i have my hf site i am the only one to do it and at my age
cn't handle the weight of steel on the tower. please post answers to
the reflector . jerry n6ifw
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com