I accidentally destroyed the balun on my KT34XA. If it is the same design
balun,
there is virtually nothing that can go wrong with it. It is made of a
couple tubular
pieces of ferrite material with just the two wires as shown in the Handbook
I just
wish that I had tested mine.
73 de joe
Michael Tope wrote:
> While I have our KLM 40 meter 4el yagi on the ground, I am wondering if I
should
> replace the stock KLM 4:1 balun? Does anyone know how these are constructed,
> how efficient are they, and how reliable are they? I have had some bad
luck with
> Hy Gain BN-86s and am wondering if the KLM baluns are any better?
>
> Thanks,
>
> Mike W4EF....................
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|