<3725A928.B17BCA50@imt.net>
In-Reply-To: <3725A928.B17BCA50@imt.net>
X-Mailer: Forte Agent 1.5/32.451
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from quoted-printable to 8bit by contesting.com id
LAA01036
Sender: owner-towertalk@contesting.com
Precedence: bulk
X-List-Info: http://www.contesting.com/towertalkfaq.html
X-Sponsor: W4AN, KM3T, N5KO & AD1C
On Tue, 27 Apr 1999 13:10:16 +0100, you wrote:
>To anyone,
>
>What is the impedance of the two 75 ohm cables in parallel? Is it close
to 450
>ohms so that you just hook it up directly to the end of a long run of 450 ohm
>open wire feeder?????
>
Just a smidge less than the two added together. The stuff really isn't
exactly 75 ohm, either. In Telco I saw it called 130 or 135 ohm.
73, y'all Guy.
73, Guy
--. .-..
Guy Olinger, K2AV
k2av@qsl.net
Apex, NC, USA
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|