Towertalk
[Top] [All Lists]

[TowerTalk] HOMEBREW TOOL AND PART POUCHES

To: <towertalk@contesting.com>
Subject: [TowerTalk] HOMEBREW TOOL AND PART POUCHES
From: n1lo@hotmail.com (Mark, N1LO)
Date: Tue, 04 May 1999 11:47:26 PDT
Greetings TowerTalkers;

I recently found myself looking for a better way to take tools and parts up 
the tower and have them available at hand and eye level. It has become so 
handy I thought I would pass the idea along.
I found a nice, 10-pocket, suede tool pouch at Wal-Mart. Here's where the 
fun starts.
Cut a piece of 1/2" diameter wooden dowel to the same length as the belt 
loop in the pouch. Insert the dowel through the belt loop right at the top 
and secure this in two places by driving short tacks through the loop from 
the back side into the dowel. Next, pinch the loop tight around the dowel 
and cut a vertical slit in the leather just below the dowel, at the balance 
point. Attach an oval carabiner at this point and orient it such that it 
hooks through the leather, around and under the dowel, and the gate faces 
away from the front of the pouch.
You can easily clip this pouch onto your harness as you climb, then remove 
it and clip it to a horizontal tower brace right at your work position. 
Since the back side of the pouch is flat, it fits very nicely at your side 
or on the face of the tower. The pockets are distribute across the face of 
the pouch, so, unlike one large pouch, you can see what you're reaching for. 
I made a second one for parts.

Hope this helps someone,

--...MARK_N1LO...--



_______________________________________________________________
Get Free Email and Do More On The Web. Visit http://www.msn.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] HOMEBREW TOOL AND PART POUCHES, Mark, N1LO <=