Fred Hopengarten K1VR 781/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address: firstname.lastname@example.org
if sending attachments: email@example.com
On Mon, 07 Jun 1999 08:46:37 -0500 Lee Buller <firstname.lastname@example.org>
>I am thinking that a trap is gone in the Driven Element. But, Mosley
>says it could be any trap in either the reflector or the director that
>could cause it to act funning. Before I run off and buy a lot of parts,
>what do you "august" experts think?
K1VR: First thing I'd do is to take down the driven element and get it
to the ground. Then open up the two 20 meter traps. Look closely closely
closely at the wires connecting the trap to the element and the screws
holding those coils (wires) in place. Why start with the driven element?
Because it is easy, quick and cheap, and you can do it alone. It is one
of only a few things you can do without taking the beam down.
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com