Hello Everyone!
I'm the new guy on the block and am setting up a new station (tower ect.)
for the first time. I am very mechanical and informed but there is much
unchartered seas that I must cover in this installation and I need All of
your inputs!!!
First, the tower needs a little refinishing on a few spots and was hoping
someone had a good "system" (pre treatment/zinc treatment), recommendations
on what to bury my cables in on their 20'+ run and lastly on tribander
recommendations. Currently planning on a KLM KT-34xa but am open to all
suggestions! My goal: "Bigger ears (within reason) and a small mouth!"
Not planning on running any amps.
I know this is a real plate full but if anyone is brave enough to attack it
I'll supply the "fork!"
Thanks for your help and the best to you all!!!!
Mike Dunlap K0NWA
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|