I'm the new guy on the block and am setting up a new station (tower ect.)
for the first time. I am very mechanical and informed but there is much
unchartered seas that I must cover in this installation and I need All of
First, the tower needs a little refinishing on a few spots and was hoping
someone had a good "system" (pre treatment/zinc treatment), recommendations
on what to bury my cables in on their 20'+ run and lastly on tribander
recommendations. Currently planning on a KLM KT-34xa but am open to all
suggestions! My goal: "Bigger ears (within reason) and a small mouth!"
Not planning on running any amps.
I know this is a real plate full but if anyone is brave enough to attack it
I'll supply the "fork!"
Thanks for your help and the best to you all!!!!
Mike Dunlap K0NWA
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com