I urge you to spend a couple of dollars more and get a tribander that works
like separate monobanders, the Force12 C19XR or C31XR. I replaced a KT34XA
with a C31XR type aerial of my own creation and the performance improvement
is like the difference between night & day.
----- Original Message -----
From: mike dunlap <firstname.lastname@example.org>
Sent: Sunday, August 29, 1999 5:01 AM
Subject: [TowerTalk] New station/want to do it right!
> Hello Everyone!
> I'm the new guy on the block and am setting up a new station (tower ect.)
> for the first time. I am very mechanical and informed but there is much
> unchartered seas that I must cover in this installation and I need All of
> your inputs!!!
> First, the tower needs a little refinishing on a few spots and was hoping
> someone had a good "system" (pre treatment/zinc treatment),
> on what to bury my cables in on their 20'+ run and lastly on tribander
> recommendations. Currently planning on a KLM KT-34xa but am open to all
> suggestions! My goal: "Bigger ears (within reason) and a small mouth!"
> Not planning on running any amps.
> I know this is a real plate full but if anyone is brave enough to attack
> I'll supply the "fork!"
> Thanks for your help and the best to you all!!!!
> Mike Dunlap K0NWA
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com