I used a modified string system, partly because I wanted to try a new toy-
a water hose leveling system, and partly because my ground slopes.
I made a string set up with a hook on one end and a loop on the other-
hooked the line to a leg and drove a grounding rod ( just a short distance)
in the loop. Did this four times, eyeballed as Steve mentioned. Note- this
was for a fold-over tower, that (per Rohn specs) uses FOUR guys. I made a
string gadget that had four equal legs to make sure it was a square I Used
the level to mark a spot on each ground rod level with a spot on the tower.
Then I pulled the guy tight so it passed the mark on the rod and marked the
spot on the ground where I wanted the anchor to enter. It seems to have
Bill Aycock --- Persimmon Hill
Woodville, Alabama, US 35776
(in the N.E. corner of the State)
W4BSG -- Grid EM64vr
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com