I'm sure it'll work great!
The T10 drop cable Series 11 I believe refers to a similarity to RG11 which
should be good for at least a couple KW at 10 meters.
The other stuff ...That sounds like a 1.16" diameter cable, correct? I dont
have a Commscope listing but Times sells TX10-1160 which is great stuff!
I've got a bunch of that I'm burying now. For example that cable at 10 meters
has 0.16 db loss per 100 feet! Not bad at all.
At any rate, any thing made for CATV will be great for ham use up to 1 Ghz
and will handle a lot of power.
73, Ty K3MM
----- Original Message -----
From: Chris VE3FU / VO2AC <email@example.com>
Sent: Wednesday, September 01, 1999 01:17
Subject: [TowerTalk] Times Fiber T10 Drop Cable - Again
> My last message about this cable never got any responses so I figured I'd
> try again with a little more information.
> I'm trying to find out if Times Fiber T10 Series 11 Drop Cable is suitable
> for HF use. For those who may be more familiar with Belden or
> Commscope Cables, the T10 Series 11 Drop Cable = Belden 1524A = Commscope
> I hope these numbers will be more familiar to someone and will get a
> Please see http://www.contesting.com/_towertalk/9908/0505.html for my
> original post.
> Chris VE3FU / VO2AC
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com