Towertalk
[Top] [All Lists]

[TowerTalk] Rohn 25; Ham-IV & T2X mounting

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rohn 25; Ham-IV & T2X mounting
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Tue, 5 Oct 1999 13:14:45 EDT
In a message dated 99-10-05 12:42:04 EDT, wilder@abs.net writes:

> Some years ago, a friend was going to show me how to cut Rohn 25 so
>  that a Ham IV or T2X could be mounted inside the tower.  That was
>  news to me; I did not know that the trend was to cut a rung or diagonal 
>  to allow the rotor mounting.  I had mounted the rotor inside Rohn 25
>  without cutting.  I just held the T2X next to where I wanted it and 
>  easily kicked it into the space.
>  
      A Ham IV will slip in-between the braces of 25G; a T2X will not. The 
problem with 25G is that you can only mount the rotator in a top section that 
will already allow it (tapered sections, etc.) or at a section joint because 
the rotator shelf won't fit anywhere else.

      I'm sure that the factory would discourage you from cutting any braces. 
While it has been done with "success" (no failures) in most instances, it 
isn't a sound structural thing to do.

Cheers,   Steve    K7LXC
Tower Tech 

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>