Towertalk
[Top] [All Lists]

[TowerTalk] Re: shorting straps on KLM KT34XA

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: shorting straps on KLM KT34XA
From: ka4inm@qsl.net (Ron Youvan)
Date: Wed, 06 Oct 1999 01:15:05 +0000
Hi:
<< Anybody out there know of a better solution, or am I overkilling
this thing? I have 5 more elements to do, so any labor saving hints
would be appreciated.  >>

  I have a KLM KT-34A (not X) and it has this problem, I see this as a design 
defect.

My plan is to replace these "C" or "P" ? straps with stainless steel straps 
held to

the elements es gamma match with (all) stainless steel `avaition hose bands' 
screw

type radiator hose clamps/bands.  I have not worked out the details, looks like 
it

will be super sized bands (1/2" X 3') that I have seen in auto parts stores etc.

cut into 2 or 3 pieces of suitable length with the ends bent around to allow the

`hose bands' to be at the correct angle (perpendicular to the tubing.

This bent ends, forming the leads is what I havn't worked out yet.

I have replaced the two very short jumpers with some clamped on rings that I

straightened out and used, but they were able to be bent in a different manner.

This matter must be properly addressed before I put this beast up on my future

tower.


  73 (= Best Regards) de: Ron ka4inm@qsl.net
VISIT my HAM WEB SITE at: http://www.qsl.net/ka4inm
  using LINUX here & loving it!




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>