Towertalk
[Top] [All Lists]

[TowerTalk] mutual coupling "guys"

To: <towertalk@contesting.com>
Subject: [TowerTalk] mutual coupling "guys"
From: n4kg@juno.com (n4kg@juno.com)
Date: Wed, 20 Oct 1999 08:19:09 -0600

On Mon, 18 Oct 1999 16:22:54 -0400 Arthur Holmes <w1rzf@gis.net> writes:
> 
> I would like to avoid mutual coupling between the guys on my tower 
> for
> 20/15/10 and my two  80 meter phased verticals about 3/8 wl away. I 
> have
> read the ARRL antenna manual which gives guidelines for insulated
> lenghths to avoid. In my case the last section to ground is 60 ft. 

        Sounds like a good 80M vertical to me !   (60 ft, gnded end)

        The simple solution is to insert another insulator 27 ft down
        from top insulator.  This will leave a 33 ft grounded piece,
        making a good 40M vertical.  You could add a third insulator
        if you want to avoid all resonances in the "old" bands.  Or,
        place the second insulator 40 ft down from the first.  N4KG


> There
> is a turnbuckle 6 ft from ground and opening it changes the 
> impedance of
> the closest vertical, ie coupling. The total lenghth of the guy is 
> 71 ft
> broken by an insulator 11 ft from the top. Seems like I should  
> relocate
> the turnbuckel an install an insulattor at that point. Comments? tnx 
> Art

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>