Towertalk
[Top] [All Lists]

[TowerTalk] soldering flux

To: <towertalk@contesting.com>
Subject: [TowerTalk] soldering flux
From: w3svj@juno.com (N. S. FIRESTONE)
Date: Mon, 25 Oct 1999 20:53:58 -0400
I know we are not supposed to use it in the electrical trade (who solders
14/12 wire these days anyway) but I could understand the reasoning. The
acid flux itself is conductive and eventually would leach out of the
rubber/friction tape splice to cause major electrical problems. But think
of all of the sweat copper plumbing jobs (pre PVC) that are in the dirt
and nobody seems to worry about it. If we are talking about radial or
antenna connections who cares. The radials are grounded anyway and
leakage surely is no problem that goes for connections to wire antennas
that are air spaced from each other. Maybe acid core solder (KesterAcid?)
for that type of work isn't so bad. Under chassis or on pc boards, don't
do it but in the dirt or in the air? maybe it is OK.

73 de Nate, W3SVJ

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] soldering flux, N. S. FIRESTONE <=