In a message dated 10/24/99 10:04:03 AM Central Daylight Time, K7LXC@aol.com
writes:
<< Another common product is CadWeld. It's available from
industrial-type
suppliers. The molds run fifty bucks more or less and the shots are $4-5.
You
need a separate mold for each type of connection. You can spend a hundred
bucks or more real easy on this stuff but it's what the pros use.
Cheers, Steve K7LXC
Tower Tech
>>
While working at a utility company I experimented with slightly modifying the
molds because they did not have one to fit the exact diameter ground rod. The
mold was made of carbon and the existing holes could be easly drilled larger
That experimant went fine and and went into field use.
Tower2sell@aol.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|