Towertalk
[Top] [All Lists]

[TowerTalk] TB3 on 25G accessory shelf??

To: <towertalk@contesting.com>
Subject: [TowerTalk] TB3 on 25G accessory shelf??
From: jbmitch@vt.edu (John B. Mitchell)
Date: Thu, 28 Oct 1999 00:09:24 -0400
I'm planning to install a TB3 below the top of the rocket type top
section on my 25G tower.  It appears I need to drill four new holes (why
don't they pre=drill these for the TB3?) in the accessory shelf to bolt
it in.  Anyone tried this before?  I'm envisioning a somewhat critical
process to get the four holes exactly placed, and would appreciate any
helpful hints. My initial thought is to select a drill bit that's one
size larger than the bolt, in case I have trouble with exact placement
using only a hand drill.  If there's a simple solution to achieving
acceptable accuracy, I'd sure like to know about it.  Please reply to me
directly.  Thanks
John K4IQ
jbmitch@vt.edu

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>