[Top] [All Lists]

[TowerTalk] Rohn HDBX and a C3

To: <>
Subject: [TowerTalk] Rohn HDBX and a C3
From: (
Date: Sun, 7 Nov 1999 10:07:51 EST
In a message dated 11/7/99 5:12:44 AM Central Standard Time, writes:

<< Just about every
 hardware store in the USA sells Galvanized nuts and bolts. The threads are
 slightly under-cut for galvanizing on the bolts and over-cut on the nuts. >>

Actually only the nuts are ?overtapped after galvanizing? and the bolt are 
standard thread. The issue of strength is determined by the type of the bolt. 
Normal tower bolts are A325 or Grade 5. Most hardware stores will sell you 
A307s which are much weaker. Check your tower specs and use the appropriate 
bolts and avoid foreign made bolts. Again, the over tapping has no effect on 
the strength of the bolt.

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>