I'm sure that there are many who have done this, but, the manufacturers
don't supply stainless for the tower leg joints. As inexpensive as a bolt
kit for Rohn 25 is, I can replace them in 20 - 25 years. If yours aren't
lasting as long as you would like then maybe you need an Engineer to assess
your situation. Stainless frequently requires special handling, i.e.
Anti-seize and strict torque specs.
----- Original Message -----
From: Steven R. Schmidt <firstname.lastname@example.org>
Sent: Monday, November 08, 1999 9:43 PM
Subject: Re: [TowerTalk] Rohn HDBX and a C3
> I've been toying with the idea of using stainless bolts and nuts for my
> (actually used) sections of Rohn 25G; I just wonder about the differing
> metals encouraging corrosion, and whether stainless bolts are manufactured
> in adequate strength ("Grade 5," I presume) to insure it meets standards.
> Personal replies appreciated.
> Steve K4WA
> >In a message dated 11/7/99 5:12:44 AM Central Standard Time,
> >email@example.com writes:
> ><< Just about every
> > hardware store in the USA sells Galvanized nuts and bolts. The threads
> > slightly under-cut for galvanizing on the bolts and over-cut on the
> >Actually only the nuts are "overtapped after galvanizing" and the bolt
> >standard thread. The issue of strength is determined by the type of the
> >Normal tower bolts are A325 or Grade 5. Most hardware stores will sell
> >A307s which are much weaker. Check your tower specs and use the
> >bolts and avoid foreign made bolts. Again, the over tapping has no effect
> >the strength of the bolt.
> >FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> >Submissions: firstname.lastname@example.org
> >Administrative requests: towertalk-REQUEST@contesting.com
> >Problems: email@example.com
> >Search: http://www.contesting.com/km9p/search.htm
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com