In a message dated 99-11-10 18:47:00 EST, email@example.com writes:
> Can copper ribbon be clamped directly to an aluminum tower leg?
Not recommended. You want to use a piece of stainless steel between
them. And use an antioxidant as well.
If you've got round tower legs, then you'd want to use a hose clamp with
a piece of stainless between the two. Polyphaser makes them. The one for
1-1/4" to 2-1/4" (Rohn 25G, 45G & 55&) is the TK-2. Champion Radio Products
If you've got angle legs, then you'd use an angle clamp. It's made out
of stainless steel and provides a place to connect a ground wire lug or
copper strap. Champion sells them too. They're both less than six bucks.
The antioxidant is your choice, available locally.
Cheers, Steve K7LXC
Champion Radio Products
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com