Just wanted to clear up what is in a standard tower leg bolt kit from Rohn.
and six nuts. That is all. No washers and no PAL nuts. At least this is the
20G, 25G, 45G, and 55G.
I can't imagine that you could squeeze a leg hard enough to create enough
take all the downward force, especially on the bottom section of a tall tower.
to believe the bolts support a good deal of the downward force in shear. I do
that squeezing the tower leg prevents the need for a lock washer, however. I
never heard of nuts falling off of tower leg bolts or a tower leg bolt actually
breaking and/or falling out.
Ron Youvan wrote:
> Hi:<< For our tower applications, we're looking at resistance to shearing on
> the bolts. The need to achieve perfect torque values is not so
> necessary for this sort of application. >>
> I was taught the way the Rohn towers and the like, (sleeved leg)
> work is: The bolts don't support the weight of the tower, the bolt/nuts
> squeeze the
> sleeve onto the top of the leg of the section below it.
> Was I taught wrong?
> BTW Rohn sells bolt/washer/nut (I hope with PAL nuts) sets for each size of
> tower they make, about $3.10 (as I remember) for one section 6 of each)
> 73 (= Best Regards) de: Ron email@example.com
> VISIT my HAM WEB SITE at: http://www.qsl.net/ka4inm
> using LINUX here & loving it!
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com