Da: Herb Rosenberg <firstname.lastname@example.org>
A: <email@example.com>; <firstname.lastname@example.org>
Data invio: sabato 13 novembre 1999 5.57
Oggetto: [TowerTalk] Using Split Beads
> I ordered some material 43 split beads to place on rg8 coax. It appeared
> to me that the coax had an outside diameter of 3/8 of an inch, so that
> was the size of split bead I ordered. Now that I have the beads, the
> inside "hole" of the split beams is a bit small for the outside diameter
> the coax.
> So, my question is, is it essential that both halves of the split bead
> actually touch each other
Yes, if a gap exist, the flux is dramatically reduced and the inductance
minimized to a useless value.
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com