If it doesn't open, get a bigger hammer.
If it used pvc type glue to seal the parts there is almost no way to
Probably simplest to saw the tube apart and then place fixed terminal and
insides into pvc parts you can obtain at Home Depot.
I suggest you mount a threaded 'plug' into the rebuilt one. Makes it easier
to take it apart in the future.
They saw and drill easily.
But once they are glued they don't come apart.
----- Original Message -----
From: Steve Fraasch <firstname.lastname@example.org>
Sent: Monday, November 15, 1999 8:30 AM
Subject: [TowerTalk] Getting a PVC Current Balun Apart
> Anyone know the quick & easy way of getting a PVC encased current balun
> apart ?
> One of mine lost a connection to a terminal.
> Steve Fraasch, K0SF
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com