I've been using crimpon connectors both uhf, type n, tnc, bnc, sma, and
mini-uhf almost exclusively with the exception of heliax connectors for 19
years-and they don't fail if they are put on right, and they don't work any
less than solder on either. Case in point they work well even at 800-900 mhz
But there are ALOT of hacks in my business out there that couldn't put a crimp
connector, much less a solder connector onto a piece of house wire :)
>I would recommend against using a crimp connector on VHF/UHF lines.
>Compressing the dielectric and shield to something other than nominal
>will force a discontinuity or reflection on the line. Solder-type
>connectors are designed to maintain the coaxial line's characteristic
>impedance as best as possible.
>Mech crimp connectors are notorious for failing early.
</bigger></bold>Professional Wireless Communications
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com