Crimp connectors are becoming more and more popular in commercial type
installations, however I highly recommend soldering the center condutor if
you use such and animal.
My personal preference is soldered connectors, to me it just seems to be a
more secure method. This is also what we use for ALL installations at work.
Especially above 30MHZ, I would have to think that the soldered connections
are the better way to go(speaking from an electrical standpoint).
I could be completely wrong, but if it takes you THAT much longer to put on
a soldered connector versus a crimp one you are not doing something right.
All the time is spent in the prep of the cable anyway. Crimp time 20
seconds, solder time 1 minute...if time is that esential then I am in the
WRONG line of work!!!
> I was looking for crimp style pl-259 . Is there anything of this type
>that are durable
>and will work at vhf frequencies . Thanks
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
Please note the new e-mail address...email@example.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com