In a message dated 99-12-02 14:08:48 EST, firstname.lastname@example.org writes:
> I've looked in various archives and on-line vendor catalogs, but I cannot
> find information on the insulators necessary to "break up" guy wire.
> What types are generally used and where does one get them from?
You want strain insulators; the guywires interlock so in case the
insulator fails, the guy wire is still intact.
Texas Towers has them. You want a #502 or smaller for typical ham
Cheers, Steve K7LXC
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com