> How are the Rohn 25 sections defective? If you knew they
> were defective BEFORE installation, why did you proceed?
The holes were miss-drilled.
We did not know they were off until the tower was erected.
> If your guyed 190 ft tower looks like a snake, I would suspect
> the GUYS. Did your installer use a plumb bob to align the
> tower? I use two short plumb bobs at 90 degrees to each
> other to sight the tower. Others use a long plumb bob
> suspended inside the tower. Improper alignment of the
> guys will make ANY guyed tower look like a snake,
> even if the individual sections are PERFECT.
The tower was erected using DUAL transits and very high
dollar tension guages.
> To me, the quality of your INSTALLER is more suspect.
I do not know why the installer did not stop when he hit
the first defective section and notify the factory. He and I
had many years experience with Rohn, and we trusted them too much,
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com