I have a pair of KT34XA's stacked on one of my towers. I have found that
the only sure-fire way to make sure that the phase is the same on the 2
baluns is to measure it. Here's how I did it ...
- Run a little RF (< 1 watt) into both baluns simultaneously, using a
- Attach the balun leads in series.
- Using an RF voltmeter or oscilloscope, measure the output voltage.
- Flip the leads on one of the baluns around
- Re-measure the output voltage.
You will see a large difference in the output voltage - indicating in one
configuration you had the baluns in-phase, and the other configuration
out-of-phase. Now put a mark on each balun indicating the phasing.
From: Mark Sihlanick <email@example.com>
To: firstname.lastname@example.org <email@example.com>
Date: Thursday, December 23, 1999 7:26 PM
Subject: [TowerTalk] phase on klm baluns
>I'm working to put a kt34a up, but maybe sometime in future I'll add a
>second for a stack. Are the klm baluns built the same over the years so
>that I can judge the phase on the balun by where the label or some other
>marking is. Failing that, is there an easy way to tell how the things are
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com