Hi Kris, de Joe
I dropped a 2x4 into the hole, extending out the top, to serve as a
backstop for the butt of the pole. Used a snatchblock pulley arrangement
with rope and tractor to raise the pole.
Tether lines are needed to keep the pole from swinging. Plopped right
down in the hole.
This was a 30 foot pole. I tamped about a foot of dirt in there, then
plumbed the pole using a 4' level. Tamped some more dirt, kept checking
Don't know about those wooden wedges and pea gravel. Never heard of the
telephone company or power company packing with other than dirt.
73, Joe - AA4NN
Kris Mraz N5KM <email@example.com> writes:
> I have two 40 ft. bare telephone poles that will be installed
> to support wire antennas for 80m. Each will be installed 5 ft.
> into the ground. I will use wooden wedges around the hole to
> get the pole vertical then fill the hole around the pole with
> pea gravel. Does anyone have any experience installing
> telephones? Does this sound like a reasonable approach? Any
> helpful suggestions? Thanks.
> Kris N5KM
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com