Towertalk
[Top] [All Lists]

[TowerTalk] Anyone using BIG LOG periodic antenns 50ft plus boomlengths?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Anyone using BIG LOG periodic antenns 50ft plus boomlengths?
From: dcoolica@planet.eon.net (Denis Coolican)
Date: Tue, 16 Jan 2001 00:27:57 -0600
At VE6FI we have a 3.7-30 mhz log periodic on a 70 foot boom.  I did
model this antenna and found that at any frequency there are usually
only 3 elements that are active. This would make it equivalent to a 3
element beam.

It looks massive and impressive but the impressive part is that it
covers such a wide frequency range at a SWR of 2.0:1 or better.  A 5
element monobander will  out perform the log every time.

When you dealing with such a large structure the rotator is usually the
critical component.  Most rotators are not designed properly and in our
case the rotator turns at 2 rpm which is much too fast.  With the large
amount of rotating mass, this antenna should rotate at 1/4 rpm and
should have a brake that mechanically locks the antenna when the antenna
is not being used. (between contests)

Denis Ve6AQ



--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Anyone using BIG LOG periodic antenns 50ft plus boomlengths?, Denis Coolican <=