Hello Rich, I received an email from a chap that used a ring rotator with a C31.
He did not use the truss wire and he said it worked fine with just a little sag
in the boom. I plan on putting up a C31 on a ring rotator soon. If you go with
the ring rotator you will have to do some finessing with the ring part to make
it work smoothly. I had to grind the outer diameter of the ring to make it round
and I had to file the teeth of the gear on the inside of the ring to get
constant engagement with the motor. Put the ring rotator together on the bench
first to get it to work properly then do a trial assembly on the tower at a low
height to make sure all the parts clear the tower. I had to do some mods to get
clearance between the ring and the tower. I also had the grind the slots for the
motor to get full contact with the motor gear and ring gear.
gl es 73 Steve
Rich Hallman - N7TR wrote:
> Looks like the Gate Side Mounts for a Rohn 25 will not work for the Force 12
> C19 or 31XR. So now I'm looking at the TIC-Ring Rotors.
> Any info on these and users who may already be using these rotors for the
> C19/31XR Antennas?
> Rich N7TR
> Rich Hallman - N7TR
> Reno, Nevada
> N7TR DX-Cluster Access:
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com