> If your tower does need to be attached to your house, you need to use
> through-bolts through the wall with backing plates inside probably along with
> some sort of stand-off housebracket like the Rohn ones to go from the outside
> wall to attach to the tower.
>> Any suggestions on what type of screws?
> If you're going to attach it to the fascia, use anything because they're
> not going to do much anyway.
Rohn 25 specs call for their house brackets to support a minimum
horizontal load of 815 pounds in ALL directions; toward the house, away
from the house and across the face of the wall. In most if not all
residential structures, this calls for significant structural
Dick Flanagan W6OLD CFII Minden, Nevada DM09db (South of Reno)
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com