Towertalk
[Top] [All Lists]

[TowerTalk] Why does Cushcraft R7 work so well without radials?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Why does Cushcraft R7 work so well without radials?
From: rmcgaver@wi.rr.com (Richard McGaver)
Date: Tue, 13 Mar 2001 04:40:44 -0600
I use a R7 about 4' off a 100 X 100 steel roof and operate a fair amount of
QRP DX with good results.
At 100 watts I work most of what i hear.......  with patience
Rick  NK9G
-----Original Message-----
From: T93m@aol.com <T93m@aol.com>
To: rthorne@tcac.net <rthorne@tcac.net>
Cc: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Monday, March 12, 2001 7:00 PM
Subject: Re: [TowerTalk] Why does Cushcraft R7 work so well without radials?


>In a message dated 3/12/01 6:44:37 PM Eastern Standard Time,
rthorne@tcac.net
>writes:
>
><< Danny:
>
> How do you think the R6000 or R8 would perform over a steel roof.  The
base
>of
> the antenna would be about 2 to 3 feet above the roof.
>
>  >>
>It's too low and antenna would not match. Probably will shift down due the
>coupling of those 49 inches radials to big ground plain. It will work at 8
>feet and up and but cannot say for sure, I did not try....
> 73's Danny  T93M
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>