K3IWK has been around for a long time. I remember back in 1980 or so I
needed a chasis for a homebrew amplifier. I didn't have the punches or
tools to cut aluminum. I sent a drawing to Charles and soon after had the
needed chasis. It was a 4 holer using 811a's.
Anyways, his prices were fair, and turn around was quick Granted, it was
21 years ago, but I'd use him again if I had the need.
> I ran across some neat aluminium boxes made to be mounted on Rohn 25.
> The design is a box with an extended back drilled for the tower U
> They range in size from 8x10x3 to 10x20x10 and come in hinged or screw
> on access plates. Prices range from $16 to $60.
> see-- http://www.flash.net/~k3iwk
> 73 de Brian/K3KO
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
ARS N5ZC (ex KA2DSY, N2BHP, WB5M)
Remote Control Airplanes: AMA# 657062
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com