Q: What is the most frequently misspelled word on Towertalk?
On 14 Mar 01, alsopb wrote:
> I started thinking more about the question I had posed about the LOOS
> tension gauge being used to measure tension on a small piece of EHS
> attached to phylistrand.
> Here's a thought experiment I proposed. It was what got me thinking
> about how accurate the LOOS gauge is on a short section of EHS flanked
> by big grips.
> The length of the EHS section is just equal to the length between the
> Loose attach point and the readout scale. Big grips on either side.
> In this case, it would seem to be that it would take quite a bit more
> downward force to obtain the same deflection one would get for a long
> piece of the same EHS. If the two ends of the EHS were physically
> clamped in a vice, I'm sure it would take a MUCH larger downward
> force. Does the presence of husky big grips partially simulate these
> I'm beginning to think that one needs a section at least twice the
> length of the gauge to get a meaningful result.
> If the above is not true, I'd really like to have some technically
> savvy person explain to me how the gauge really does work correctly in
> these cases.
> de Brian/K3KO
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
Barry Kutner, W2UP Internet: email@example.com
Newtown, PA FRC alternate: firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com