A sign in our EMC Lab read:
"One experiment is worth a thousand opinions"
Anybody want to MEASURE the difference?
How about making a guy with a piece of philystran,
a long (10 ft) piece of EHS followed by a short (4ft)
piece of EHS, using guy grips, and a turnbuckle.
Tension this between two solid supports and observe
the LOOS gauge reading on the short and long pieces
de Tom N4KG
On Wed, 14 Mar 2001 00:45:35 +0000 alsopb <firstname.lastname@example.org> writes:
> I started thinking more about the question I had posed about the LOOS
> tension gauge being used to measure tension on a small piece of EHS
> attached to phylistrand.
> Here's a thought experiment I proposed. It was what got me thinking
> about how accurate the LOOS gauge is on a short section of EHS
> by big grips.
> The length of the EHS section is just equal to the length between
> Loose attach point and the readout scale. Big grips on either side.
> In this case, it would seem to be that it would take quite a bit
> downward force to obtain the same deflection one would get for a
> piece of the same EHS. If the two ends of the EHS were physically
> clamped in a vice, I'm sure it would take a MUCH larger downward
> force. Does the presence of husky big grips partially simulate
> I'm beginning to think that one needs a section at least twice the
> length of the gauge to get a meaningful result.
> If the above is not true, I'd really like to have some technically
> savvy person explain to me how the gauge really does work correctly
> these cases.
> de Brian/K3KO
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com