Towertalk
[Top] [All Lists]

[TowerTalk] replacement wench?

To: <towertalk@contesting.com>
Subject: [TowerTalk] replacement wench?
From: baycock@HIWAAY.NET (Bill Aycock)
Date: Sun, 18 Mar 2001 14:56:17 -0600
Mike-
I had to replace the winch on the 48' fold-over I put up about two years
ago. The tower was about 30 years old, and the only part needing
replacement was the winch-
I researched it pretty well, and found an acceptable onea at WalMart, but
the best was a Fulton model t2005, Trailer winch, rated for 2000 pound
cable force.. It had a reversable ratchet, and an optional safety brake. It
has worked very well.

The address is:
           

                   Fulton Performance Prods Inc
                   50 Indianhead Dr, 
                   Mosinee, WI 54455-9512 
                   Phone: (715)693-1700

I once had their URL but lost it.

Good luck- Bill;-W4BSG

At 11:51 AM 3/18/01 -0600, you wrote:
>Does anyone know of a replacement wench appropriate for use with the Rohn 
>25G fold-over tower?
>
>Thanks!
>Mike, WQ5C
>wq5c@texas.net
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>
>
-
Bill Aycock   ---   Persimmon Hill 
 Woodville, Alabama, US 35776
 (in the N.E. corner of the State)
      W4BSG   --   Grid EM64vr
        baycock@HiWAAY.net
             w4bsg@arrl.net

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>