Towertalk
[Top] [All Lists]

[TowerTalk] Let's give COMTEK it's earned reputatioin ref10m COMTEK 4 sq

To: <towertalk@contesting.com>
Subject: [TowerTalk] Let's give COMTEK it's earned reputatioin ref10m COMTEK 4 sq ...
From: K3BU@aol.com (K3BU@aol.com)
Date: Sun, 18 Mar 2001 20:33:33 EST
In a message dated 3/18/01 6:40:14 PM Eastern Standard Time, Brooks90@aol.com 
writes:
<<  Hi All,  I have to agree with Dinsterdog that COMTEK has a fine circuit, 
has 
been very reliable in my following of 4 sqr. development.  Also, Jim Miller , 
K4 SQR, is honest as the day is long and what I'm missing here is if he  has 
been consulted about this issue, as I'm sure he will do whatever to make it 
right, whether or not there is a part, etc. problem.   Both his design and 
his reliability/back up are "right on".  Cheers,  Steve  K1PEK 
  >>


Before thread gets off on the wild tangent.
I have copied Jim on my posting, and I agree with above statement. I have no 
beef about that. It is weekend, I spent Saturday soaking in the rain in hope 
that my measurements with resistors are not important (maybe there is 
something I don't know and manual doesn't tell) and thing might work after 
all, and that someone might have had experiences with their 10m unit and help 
before Jim gets through his email at work.

So, if you have 10m unit, you measured the impedances, they are the same (or 
close) as I mentioned and your unit works (with what?), please let me know. 
Please don't read what it is not there.
I am getting affraid to post or ask questions, you get "answers" to unasked 
questions and end up being acused of ....

73 and have nice day :-)

Yuri
da vertically challenged beach BUm

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>